Parts-required-to-convert-to-soft-anvil-cutting-148x300Soft Anvil Conversion

Steel glue tab cutting systems require a thick, expensive tab blade adjusted to make contact with a steel anvil surface. When the press operator incorrectly adjusts the pinch cut setting and applies too much pressure, the result is excessive anvil loading which transfers from the head to the shaft and gradually begins to affect the operation of the machine.

The Sauer soft anvil system is designed to eliminate the problems caused by steel glue tab cutting, protect your machine, increase operator confidence, and reduce total cost of ownership. Installing the system is quick and easy. No special tools or experience are required. Replacing tab knives, covers, and the pinch blades on a consistent basis will maintain the system. The replacement cost for these items is far less than the steel system and parts can be delivered from stock as needed. Our system is designed to provide years of trouble-free service.


Anvil Covers

Sauer System anvil covers are made from high grade polyurethane and are designed for quick installation and removal with no tools required. The unique two-piece ‘jigsaw puzzle’ design of the covers allows free-wheeling movement on the head, extending cover life.



Glue Tab Cutting Systems and Components < – > Slotter Heads and Trim Knife Hubs

Back to Sauer Systems